Plasticizers – Commonly used additives
Plasticizers are low molecular weight polymers employed to improve processibility of polymer blends like Aramid Blends.
Plasticizers are low molecular weight polymers employed to improve processibility of polymer blends like Aramid Blends.
Hyperbranched Polymers have lower viscosity than linear polymers. There synthesis and properties are described with relevence to Aramids.
FTIR spectroscopy is employed to study aramid fibers and its blends. Peaks identifications of Aramid blends and regions of IR spectra are discussed.
KEVLAR is high strength and low density fiber used in applications like Bullet Proof jacket. Mentioned here are its synthesis, applications and uses.
Brinell Hardness Test is employed for variety of materials using variable loads and indentors. Common defects like ridgind and sinking appears during test.
Scaling of microstructure is very important for depiting true picture of microstructure. procedure for right way of scaling is discussed in detail here…
Quenching of steel results in martensite. Amount of martensitic formation depends upon how fastly quenching media like water, brine and air extracts heat.
Widmanstatten structure in steel lowers hardness but they have some applications too. Find out microstructural development and ways to eliminate it.
Martensitic transformation happens when carbon steel, after heating above A1 line, cools drastically with cooling rate higher than critical cooling rate.
In this post, for better understanding of Aramids and Para Aramid Fiber properties especially Twaron properties is discussed here. Along with it, Aramid applications in different sectors of life are also shared. Para Aramid Fiber Properties If you want to have a better understanding of Aramids and their synthesis. Please follow, “what are Aramids and …
Para Aramid Fiber Properties (Twaron properties) and Aramid Applications Read More »